Add horsepower to your 1996-2004 Mustang 4.6L without breaking the bank & while keeping an OE Appearance with this Budget Cold Air Kit from JLT! Made popular by the 2003-2004 Cobra, this style of filter kit offers easy installation & great power gains. The custom formed heat shield keeps fan wash & engine heat away from the filter inlet & the 4"x9" S&B Conical Air Filter flows enough air to keep even Whippled Cobras happy. Also included is a billet aluminum MAF adapter that allows the conical filter to be used with your stock MAF, both 80mm & 90mm versions.
Fits 1996-2004 Mustang GT, 1996-1998 Mustang Cobra, 1999/2001 Mustang Cobra, & 2003-2004 Mustang Cobra. Will not work with 2003-2004 Mach 1 unless you disable the shaker inlet.
JLT performance inc, will repair or replace any part of their product found upon our inspection to be defective in workmanship or material within 1 year from the purchase date for the original purchaser. Air filters will not be accepted for return unless they are still in sealed plastic bag.
I bought this for my 96 GT 5speed to replace a ill-fitting BBK fender well cold air intake (didn't clear factory strut tower brace with Urethane motor mounts). I had a K&N FIPK cold air but didn't like the quality/fit and finish. so long story short I was told to pick up this bolt on cold air kit from JLT. I am in love with it so much i am buying it for my new project mustang, a 2000 GT. You reuse your stock intake tube, so you know it clears strut tower, and it uses a MAF (Mass Air Flow) adapter to reuse your stock mass air or your upgraded unit. Next it comes with a Huge JLT oil type cone filter. Mine didn't come oiled, but i had some K&N spray oil to get things going (even sell that spray oil at Auto Zone and some Wal Marts). The heat shield is great and does a good job at keeping things clean, good looking and most of all reducing heat soak. The whole setup is easy to install, even the heat shield has a bump to clear the air bag bolts (green colored bolt heads mounted to radiator core support). As for performance, a few ponies at WOT but mostly it wakes up the sound (nice intake charge sound under throttle). It is nice and easy to service (i clean it every 5k miles). So do yourself a favor and buy this kit, highly recommended!!! A+++ JLT!
JLT has become one of the industry leaders in Mustang & Lightning performance by bringing in some of the highest performance gains with their performance cold air intake systems. By designing and engineering their own products, they have been able to see huge gains in horsepower and torque in developing direct fit air induction kits. Shop Latemodel Restoration for JLT cold air intake kits and oil separators to get the most performance out of your Mustang or Lightning!
Products by Vehicle
Email Me When It's Back In Stock!
Email Me When It Arrives!
Upload a Picture
Upload your own picture of the Mustang JLT Air Filter & Maf Adapter Kit (96-04)
Please make sure to hold your device horizontally (like a camera) rather than vertical (like a phone).
By uploading an image, you agree to give LatemodelRestoration.com® permission to use it in future advertisements and promotions.
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!