You Save 11.12 % ($8.33)
Bed-in / Burnishing Instructions: 1. After installing new brake pads, make 6-to-10 stops from approximately 30-35 MPH applying moderate pressure. 2. Make an additional 2-to-3 hard stops from approximately 40-45 MPH. 3. DO NOT DRAG BRAKES! 4. Allow at least 15 minutes for the brake system to cool down. 5. After step 4 is completed, your new Hawk Performance brake pads are ready for use.
Ford F-150 SVT Lightning - 1993 (93)