A new Hurst Competition/Plus short throw shifter is now available for the 2005-10 Mustang GT equipped with 5-speed manual transmission. Engineered for more positive and precise gear changes, this shifter reduces knob travel by 40% for a shorter throw, allowing for quicker shifts. Installations of this shifter makes such a noticeable difference in the way and feel that it shifts, it's like comparing the night and day.
Hurst quality crafted to assure longevity and reliability. Includes urethane bushings and rear mount to eliminate shifter rail flex. Designed for direct bolt-in installation eliminating the need for any modifications. Available with the traditional Hurst chrome plated stick and classic white knob for that "Hurst equipped" look.
Other features include:
- Heat treated linkage rods and arms for added strength and durability
- Adjustable gear stops prevent over shifts to help prolong transmission life
- Complete with all hardware and easy to follow installation guide.
It's time to improve your 05-09 S197 Mustang's sloppy stock shifter. Replace that worn out stock shifter with an aftermarket Mustang short throw shifter such as Hurst, Barton Industries, Steeda, Pro 5.0 and more available at LatemodelRestoration.com. Don't forget to add a new trick Mustang shift knob to give your Pony that distinctive look.
Follow along in the video as Jmac shows you how to install a shifter in your 05-09 Mustang. LatemodelRestoration.com carries short throw shifters for the following year model
Ford Mustang - 2005 (05) - 2006 (06) - 2007 (07) - 2008 (08) - 2009 (09). These cover the following models - V6, GT, Bullitt, Shelby GT500 Mustangs!
0:00:01 - 0:00:17 Improving shift feel and reducing shift throw is normally at the top of the list and one of the first mods any manual transmission mustang owner makes. This is especially true for 05-10 s197 mustangs with manual transmissions - particularly Mustang GTs.
0:00:17 - 0:00:45 Today we're going to be installing the Hurst billet plus shifter for S197 Mustang GTs. Which gets its name from its sturdy billet aluminum construction. It is also fitted with good polyurethane bushings to get rid of some of that slop and reduces shift throw. Even though the Tremec 3650 5 speed transmissions that were installed in 05-10 S197 mustangs had internal shift stops, on the billet plus shifter Hurst went a little bit further and added external shift stops for a little bit of extra protection.
0:00:45 - 0:01:10 the Hurst billet plus short throw shifter includes the shift assembly, the signature Hurst white shift knob, a chrome handle and comes with new attaching hardware, neoprene insulators and a new handle grommet and tie strap to hold it into place. Also in the box are detailed set of instructions and a couple of Hurst logo stickers for your tool box, refrigerator, windows or wherever you want to stick them.
0:01:10 - 0:01:31 As always installation of your new parts begins with the removal of the old. Take out the old shift knob by unscrewing it counterclockwise. Pop the shifter boot up out of place. Then remove the boot from the handle. Take out the rubber dust boot from the shift stick by pulling it up and out of the floor pan and sliding it over the shift lever.
0:01:31 - 0:02:13 Lift the Mustang. Grab a thirteen millimeter (13mm) wrench and remove the hex nut that holds the linkage rod to the shifter. Keep this nut handy, you will reuse it. Take the linkage rod off of the stock assembly. Grab a ten millimeter (10mm) wrench and remove the forward bolt that attaches the stock assembly to the side of the transmission. Then grab a ratchet, a long extension and a ten millimeter (10mm) socket. unscrew the two hex nuts that support the rear of the shifter. Remove the metal bracket from the rear rubber isolator. Set it aside because you will reuse it on your new shifter. Lower the shifter down. Move it slightly forward so you can get the back side of the stock shifter up through the hole in the transmission tunnel. Then remove the shifter from the inside of the car.
0:02:13 - 0:02:34 On the workbench, remove the two metal flange sleeves from the front of the stock shifter and install them in your new Hurst assembly. Then remove the two plastic bushings from the bottom of the handle head and install him in the new Hurst assembly. Install the new Hurst assembly from inside the vehicle; sliding on down into position.
0:02:34 - 0:02:55 Crawl underneath and loosely install the front bolt that holds the shifter to transmission case. Slide the metal bracket you removed earlier over the rear bushing. Hold the assembly up into place and install the two ten millimeter (10mm) nuts. Go ahead and tighten those down. Install your linkage rod, the retaining hex nut, and tighten it down. Then go ahead and tighten the forward bolt.
0:02:55 - 0:03:17 Go ahead and crawl back in the car and let’s adjust those shifting stops. Slide the shift lever into fourth (4th) gear and run the shifting stop all the way up to where it touches the lower handle. Back it off slightly. Grab you a three sixteenths (3/16) Allen head a fourteen millimeter (14mm) open end wrench. Then tighten down the lock nut. Slide the shift lever into third (3rd) gear and repeat the same process on the front stop.
0:03:17 - 0:03:50 With your two attaching bolts and star washers, grab your chrome handle. Hurst supplies to neoprene insulator pads to go in between the shifter handle and the base. You can use none, one or both. We elected to use one to help dampen some of the noise coming from transmission. Lower your handle into place and use a seven thirty seconds (7/32) Allen head to tighten the two attaching bolts. Slide your lower rubber shifter boot into place making sure that the wide lower lip goes down underneath the transmission tunnel and seats properly.
0:03:50 - 0:04:26 Grab your new boot rubber insulator. Slide it over their chrome shifter lever. Grab your shifter boot. Snap it down into place and roll the top over the new rubber insulator. Take your knob jam nut screw it all the way down on the lever. Then screw your knob into place. You do not have to tighten your knob down all the way because guess what the shift patterns going to be off. So back it up slightly too where the pattern is exactly where you want it. Then take you and nine sixteenths (9/16) wrench and tighten up the lock nut. This will hold the knob in place in your Mustang.
0:04:26 - 0:04:30.860 Man that feels a whole lot better and the beautiful part is this same general steps apply to most aftermarket shifters. So for more 05+ S197 mustang drivetrain parts and videos check out LatemodelRestoration.com.
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
Great Upgrade and easy installation with the right tools
Was this review helpful to you?
Jimmy Hightower on
I purchase the Hurst shifter for my sons car as a replacement because the OEM shifter was badly worn and apparently a flawed engineering problem from the day it was installed in the car. After the new Hurst shifter was installed my son told me it was better than when the car was brand new and had no sloppy movement or vibration, he was completely satisfied with the "upgrade" as he called it. Thanks Latemodel Restoration for the great value at a better price than a new OEM replacement part.
Yes, I would recommend this item to a friend!
Was this review helpful to you?
hurst competition plus shifter
David D. on
This is the second one I've bought they work badass and they are perfect fit
Hurst shifters are by far known as being one of the most popular and sought after aftermarket mods for Mustangs and Lightings. If you are running a Hurst shifter you know what we are talking about. The precision and quality of a these Mustang shifters is what sets Hurst so far ahead of the competition. Shop LatemodelRestoration.com for your Hurst shifters, shift knobs, shift balls, roll control kits, and other shifter components.
I would like to give a big thank you to Latemodel Resto Employee Tyler Rodriguez, he went above and beyond to provide outstanding Customer service, really made me a customer for life, i plan to make all my future purchases from latemodelresto when i get my hands on a 2015 Mustang. thanks again Tyler for the outstanding customer service you and latemodelresto provide.
My 1988 fox body lx 5.0 has 70,000 miles on it . I redid the seats with the TMI seat covers.I Put on after market wheels, with a decal on the center caps . The rims are a Voxx rim. With a red running ...