Long lasting urethane dust boots will keep your ball joint protected!
Black Polyurethane dust boots
Zinc coated castle nuts
Correct cotter pins
What's in the Box
(2) 1979-1993 Ball Joint Dust Boots
(2) 1984-1986 SVO Ball Joint Dust Boots
(2) Ball Joint Castle Nuts
(2) Cotter Pins
Ball Joint Resto Kit
If you have gone to install a set of springs & you realize that your ball joint dust boot is trashed, the cotter pins are broken, & the nut is beaten up or incorrect, then this Ball Joint Resto Kit is the perfect remedy for you! Most of the time, the ball joints are still good! There is no need to buy new ball joints to fix this issue.
This 1979-1993 Mustang Ball Joint Resto Kit includes all the needed new hardware to reassemble the control arm to the spindle. The black urethane dust boots will keep your ball joint free of road debris & water. The castle nuts are zinc coated for corrosion resistance & the cotter pins are the correct diameter & length for Fox Mustang ball joints.
New ball joints include new hardware, so this kit is only needed if you are re-using your existing balljoints.
My ball joints in my '86 checked out ok, after upgrading to firmer springs the factory boot tore (using the fork type separator isn't the greatest way to separate the spindle and ball joint...). Since the existing boots were probably 10+ years old I figured it's cheap insurance vs the cost of risking ball joint failure due to torn boots + contamination. Installation is super easy. The new boot fits well over the existing ball joint, and they are definitely good quality. Make sure you have plenty of new clean grease before you install the boot and re-torque the lower spindle nut.
Yes, I would recommend this item to a friend!
Was this review helpful to you?
Walter B. on
I bought this kit simply for the fact I needed the new castle nuts. But it turns out this kit fits on the ball joints from the sn96 control arms I purchased. I would recommend the purchase of this kit if you upgrade the a arms. The didn't mention this on the product page but these covers are important.
50resto - Dedicated To The Preservation Of The Fox Body Mustang
50resto is your trusted source for 1979-93 Mustang Foxbody restoration products. Buy 50resto products from Latemodel Restoration Supply and receive the best value, quality and industry-leading customer service. Whether you need Fox Body Mustang weatherstrip, headlights, taillights, seals, body panels, hardware, door handles, trim parts, carpeting or upholstery, 50resto is the brand you should demand.
SVE and 50resto Warranty
One Year Hassle Free Replacement
SVE and 50resto products are warranted to be free from defects in materials or workmanship for one year from date of purchase. What does this warranty cover? YOU! That’s right, whether you ordered a SVE brand Mach I grille delete or a 50resto brand light kit, if your product fails within a year of your purchase we got your back! Some conditions will apply.
Testimonial: Awesome products and great service!!!!
Your website was great to restore my 1991 LX mustang. I found everything I needed including great tech articles and even had to return the product with no hassle at all prices were great shipping go superfast of course free could not of asked for anything more. Once again great job and I will be purchasing more in the future.