This 1987-1993 Mustang quarter window installation kits contains everything you need to install your Fox Body quarter windows. Whether you are installing new windows or replacing your OEM windows, this hardware kit will help make the repair! This kit features 15ft of 3M window sealer and 18 attaching nuts to restore your Foxbody.
Video: Mustang Quarter Window Removal/Replacement (87-93 Fox Body Hatchback)
Published on 2013-12-13
Don't let Rotten Quarter Window Disease ruin the look of your Mustang's exterior! Thanks to the help of 5.0Resto and LatemodelRestoration.com you can replace your whole 1/4 window and give your Stang a refreshed and updated appearance! These replacement quarter windows are a direct replacement and DO NOT have the "MUSTANG" text on the glass like the Ford Original versions.
In this video Jmac will show you how to remove and replace your 1987-93 Hatchback 1/4 windows. You can save yourself plenty of money by completing this installation in your own driveway!! Don't forget to pick up a Fox Body Quarter Window Installation Kit (HDW-29710B) in the link above to finish off your window install.
1987-93 FORD MUSTANG QUARTER WINDOWS HATCHBACK - FOX BODY Part # LRS-29710A-K Brand: 50Resto Fits: Ford Mustang LX, GT & Cobra Years: 1987 (87) - 1988 (88) - 1989 (89) - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93)
If you've got an '87 to '93 Fox Mustang hatchback with the rotten quarter window disease, and you've decided that a set of covers just isn't for you, then you're faced with completely replacing those old quarter windows. Follow along, and I'll show you the steps required to get the job done. Carefully remove the side headliner trim pieces from above the door opening.
Remove the seat belt shoulder strap anchor bolt. Remove all of the trim panel retaining screws. You'll have three at the front, one at the top, one through the coat hook, one midway down. Remove the four screws and the rear headliner trim piece. Then remove the four screws going down the back of the panel. Finally, you can remove the two screws retaining the hatch cover mount.
Gently pull the panel inward. Repeat for the other side. Remove the nine quarter window retaining nuts. From the outside, pull the window away from the body and remove it from the car. Clean away all the remaining butyl sealer and thoroughly clean the area behind the window. Take your new quarter window in your 50Resto install kit, and place new butyl sealer on the window.
Carefully position the new window in place and loosely install the nine new retaining nuts. Starting in the middle, slowly start snugging down the retaining nuts, working your way around the window several times until the window is fully seated. Do not over tighten. Be very careful throughout this process. While you've got your interior panels taken loose, it's a great opportunity to go ahead, clean them up, maybe even do a little paining if you need to.
You can pick up your new quarter windows at latemodelrestoration.com, and don't forget to pick up a new quarter window installation hardware kit. Be sure to leave us a comment below, let us know what other videos you'd like to see. Like and share this video with your friends if you found it to be helpful.
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
This was my teenage dream car. I bought it as a daily driver to and from work but quickly got hooked on the project of making it an amazing ride. So far what I have done is an interior restoration, ad...