These are OE type quarter window attaching nuts for your 1987-1993 Mustang Hatchback or Coupe. This nut is a direct replacement for the original nuts that came on the Mustang from the factory. Features the correct butyl sealing washer to keep the elements out! Enough to attach both hatch quarter windows.
Hatchback Mustangs will take all 18 nuts, Coupe Mustangs will use only 14.
Video: Mustang Quarter Window Removal/Replacement (87-93 Fox Body Hatchback)
Published on 2013-12-13
Don't let Rotten Quarter Window Disease ruin the look of your Mustang's exterior! Thanks to the help of 5.0Resto and LatemodelRestoration.com you can replace your whole 1/4 window and give your Stang a refreshed and updated appearance! These replacement quarter windows are a direct replacement and DO NOT have the "MUSTANG" text on the glass like the Ford Original versions.
In this video Jmac will show you how to remove and replace your 1987-93 Hatchback 1/4 windows. You can save yourself plenty of money by completing this installation in your own driveway!! Don't forget to pick up a Fox Body Quarter Window Installation Kit (HDW-29710B) in the link above to finish off your window install.
1987-93 FORD MUSTANG QUARTER WINDOWS HATCHBACK - FOX BODY Part # LRS-29710A-K Brand: 50Resto Fits: Ford Mustang LX, GT & Cobra Years: 1987 (87) - 1988 (88) - 1989 (89) - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93)
If you've got an '87 to '93 Fox Mustang hatchback with the rotten quarter window disease, and you've decided that a set of covers just isn't for you, then you're faced with completely replacing those old quarter windows. Follow along, and I'll show you the steps required to get the job done. Carefully remove the side headliner trim pieces from above the door opening.
Remove the seat belt shoulder strap anchor bolt. Remove all of the trim panel retaining screws. You'll have three at the front, one at the top, one through the coat hook, one midway down. Remove the four screws and the rear headliner trim piece. Then remove the four screws going down the back of the panel. Finally, you can remove the two screws retaining the hatch cover mount.
Gently pull the panel inward. Repeat for the other side. Remove the nine quarter window retaining nuts. From the outside, pull the window away from the body and remove it from the car. Clean away all the remaining butyl sealer and thoroughly clean the area behind the window. Take your new quarter window in your 50Resto install kit, and place new butyl sealer on the window.
Carefully position the new window in place and loosely install the nine new retaining nuts. Starting in the middle, slowly start snugging down the retaining nuts, working your way around the window several times until the window is fully seated. Do not over tighten. Be very careful throughout this process. While you've got your interior panels taken loose, it's a great opportunity to go ahead, clean them up, maybe even do a little paining if you need to.
You can pick up your new quarter windows at latemodelrestoration.com, and don't forget to pick up a new quarter window installation hardware kit. Be sure to leave us a comment below, let us know what other videos you'd like to see. Like and share this video with your friends if you found it to be helpful.
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
50resto - Dedicated To The Preservation Of The Fox Body Mustang
50resto is your trusted source for 1979-93 Mustang Foxbody restoration products. Buy 50resto products from Latemodel Restoration Supply and receive the best value, quality and industry-leading customer service. Whether you need Fox Body Mustang weatherstrip, headlights, taillights, seals, body panels, hardware, door handles, trim parts, carpeting or upholstery, 50resto is the brand you should demand.
SVE and 50resto Warranty
One Year Hassle Free Replacement
SVE and 50resto products are warranted to be free from defects in materials or workmanship for one year from date of purchase. What does this warranty cover? YOU! That’s right, whether you ordered a SVE brand Mach I grille delete or a 50resto brand light kit, if your product fails within a year of your purchase we got your back! Some conditions will apply.
Well me and my girlfriend had a day off and decided to take a road trip to Late Model Restoration. Let me tell you, we had the best CUSTOMER SERVICE ever. Jay was very helpful and knowledgeable about the parts I purchased. The showroom was clean and inviting. Also I got to meet JMAC that host's all of their YouTube videos. They also had project BLUE COLLAR in the parking lot, and it is NICE. I will recommend Late Model to everyone I know...