Bolts Into Same Mounting Location As OEM Power Rack
54 1/2" Overall Length
3 3/4 Turns Lock To Lock
14" Mounts Center To Center
1/2" Diameter Mounting Holes
9/16"-26 Spline Pinion Shaft
13" Inner Ends
M14 X 1.5 X 2.5" Inner Tie Rod End Thread
What's in the Box
(1) Manual Rack Assembly
(2) Billet Mounting Brackets
(2) Inner Tie Rods
(1) Forged Steering Shaft U-Joint
Ask and you shall receive! – Introducing the Flaming River 2005-2010 Mustang Manual Rack & Pinion! The newest addition to Manual Rack & Pinion steering is lighter than the factory Mustang power system - reducing vehicle weight by 10-15 lbs. (depending on vehicle specifications) by eliminating hoses, pulleys and pumps. Also, the billet aluminum mounting brackets can be adjusted to modify the pinion angle for large tube headers and engine swaps in custom applications.
LRS has put together this kit to make sure you have all you need to install this manual rack onto your 2005-2010 Mustang GT or V6. kits comes complete with steering rack, billet mounts, inner tied rods and steering shaft U-joint. All you have to do is transfer your factory outer tie rods over to the manual rack, modify the factory steering shaft end to accept the Flaming river u-joint, and bolt it up and you're done. Instant weight savings from removing all the power steering pump and associated lines as well as and increased power gains from your motor not having to turn the pump anymore.
Flaming River - Your Complete Steering Company
Each Flaming River product is designed to incorporate new parts... absolutely nothing is rebuilt. This ensures Flaming River parts can maintain the upmost quality standards, improve the design and offer long range product availability. Over the past 15 years, Flaming River has designed many award winning products For 1979-2010 Mustangs including standard and quick ratio manual steering racks.
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!