Provides an Unbelievable Sound Quality Like No Other
Made in USA
409S Stainless Steel for Maximum Durability
Patented Scavenger X-pipet
Specially Engineered 3-Chamber Mufflers
What's in the Box
(1) Pair of Delta Flow 60 Series Mufflers with 4" Polisted Stainless Tips
(1) Pair of 409S 3" Stainless Steel Tail Pipes
(1) Cut & Clamp 2.5" to 3" X-Pipe
All Needed Hardware
Flowmaster's new American Thunder Cat-back system for the 2005-2010 Mustang GT & GT500 takes performance to the next level. Developed and proven on the dyno, this dual 3.00" Mustang Catback Exhaust System maximizes the breathing of Ford's much-respected modular 4.6L 3V & 5.4L 4V V8 engines, delivering increased engine power, torque and throttle response.
Fully mandrel bent, it features a Scavenger Series® X-pipe assembly for mid range torque improvement and a pair of mustang-specific 60 Series™ mufflers with Delta Flow® technology. The result is an incredibly deep, powerful exterior sound with a moderate interior sound level. The X-pipe is the cut & clamp design allowing the retention of the stock catalytic converters.
Constructed from durable 409S stainless steel and finished off with 4.00" polished tips, the system is covered by Flowmaster's Lifetime warranty. The system includes everything required for easy installation including hardware and detailed instructions.
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
Published on 2013-10-22 Flowmaster, the exhaust technology company, has deep roots in the Mustang performance exhaust history. The Flowmaster 2 chamber muffler was one of and still is one of the most sought after exhaust additions to any Ford Mustang. Their deep throaty exhaust was made super popular during the Fox Body Mustang era with their 2 chamber 40 series mufflers that have now become muffler legends. Since then Flowmaster has evolved and branched off into more than just great sounding mufflers.
They now produce some of the best sounding and highest quality cat back and axle back systems. They also produce high flow catalytic converters, long tube headers and mid pipes to ensure they have every component you need to finish your Mustang exhaust project off the right way! Click the link above to see the full line of Flowmaster exhaust component for your Mustang.
In the early 1980s, Flow Master Mufflers were born to combat excessive sound issues at race tracks in California and all across the US. One patented innovation led to another and evolved into the company it is today. All Flow Master products are proudly manufactured right here in the USA and will improve the sound and performance of your Mustang or Lightning.
Latemodelrestoration.com carries full cat backs, axle backs, individual mufflers, and catalytic converters. If you're not viewing this video on our site, click below to check out our Flow Master offering and give your Mustang or Lightning the signature Flow Master sound.
Flowmaster - The Exhaust Technology Company Flowmaster operates the only exhaust Research & Design facilities of its kind in the world, centered around the SuperFlow SF-7100 engine dynamometer complete with E.C.A. (engine cycle analysis) equipment and also SuperFlow chassis dyno's.
Through use of these dyno's, Flowmaster's engineering staff can track the complete engine cycle in millionths of a second and can obtain exact technical data of each degree of cam rotation, from induction to the tip of the exhaust system, while also showing the power numbers that really matter, the power numbers "to the ground."
Flowmaster also utilizes Spectrum Analyzers to fine "tune" the sound of each of the eleven different series of mufflers that Flowmaster currently offers, both for peak performance and just the right sound levels and tones. Flowmaster's dedication to quality is what makes them the exhaust industry leader for Latemodel Mustangs and SVT Lightnings!
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!
I recently traded in my 2010 GT Premium for a manual 2015 GT Premium with the Performance Package. At first I wasn't sold on the new Mustang body style but after seeing it in person and seeing the aw...