Eibach Anti-Roll-Kits, sometimes referred to as Sway Bars, reduce body roll through increased design stiffness over the stock factory bars. The result is increased handling and cornering performance in any driving situation.
- Performance Tuned Handling
- Further Reduce Body Roll
- Precision Engineered for Pro-Kit & Sportline
- Part of the Eibach "Pro-System-Plus"
- Million Mile Warranty
- ISO 9001 and QS 9000 Quality Approved
Complete your suspension upgrade with an Eibach Anti-Roll-Kit. While our Pro-Kit and Sportline spring sets are regarded as the major suspension tuning device, the Eibach Anti-Roll-Kit allows critical fine-tuning of the vehicle's handling characteristics.
Our Anti-Roll-Kits further reduce body roll through increased design stiffness over stock bars. The result - increased handling and cornering grip in any performance-driving situation. You will appreciate the added stability next time you dive into your favorite hairpin.
Manufactured from cold-formed, high-strength aircraft-grade steel for precision performance and finished with a long-lasting red powder coat finish - the Anti-Roll-it also comes complete with all mounting hardware and instructions for easy installation.
Big improvement over stock. The only issue one may experience is fitment on some "After Market" Lower Control Arms. Some "After Market", Lower Control Arms, have 1/2" Sway Bar mounting holes. The Eibach Rear Sway Bar mounting holes are 3/8". To properly and securely mount the Rear Sway Bar in this situation, the Eibach Rear Sway Bar must be drilled out to 1/2", and 1/2" Heavy Duty mounting bolts/nuts/washers must be purchased (4 of each Lower, Home Depot, Ace, etc.). These Sway Bars are very hard/spring steel. Use "Cobalt Steel" bits, or better! The process, on the Rear, will take about 45min. to 1 hour including installation.
Note: Use "Colbalt Steel" Drill Bits (Standard Tip, not Pilot Points), at Very Low speed and with lots of oil, or you will destroy the bits in about 10 seconds. Use a 2 step process.... 7/16" Cobalt Bit, then 1/2" Cobalt Bit. These bits will run you about $15 to $18 each.
The Front Sway Bar is straight forward and simple!
Though this took a little extra work, the end result is awesome. They definately compliment the Eibach Sportline Springs.
Eibach - "The Will to Win"
Eibach makes the finest performance suspension products in the world for your Mustang or Ford Lightning. When other suspension components sag, wear out, or create sloppy handling or a bone-crushing ride, top street tuners—like top race teams, from F1 to WRC, from Le Mans to NASCAR—inevitably turn to Eibach.
Eibach integrates the exact same technology in their street springs as they do in their legendary race springs. Eibach uses the world´s finest Hi-Ten spring steel, produced to exceedingly precise tolerances. Eibach uses world-renowned German CNC coilers, as well as many unique machines engineered and built specifically by Eibach—simply state-of-the-art technology, in every step of the manufacturing process. Shop LatemodelRestoration.com for your Eibach Mustang lowering springs, suspension kits, and sway bars.
I have been ordering items from Latemodel Restoration for many years. I've found them to be exceptionally professional, timely with order processing and shipping correct items ordered. I've never received an incorrect item on an order.
This was my teenage dream car. I bought it as a daily driver to and from work but quickly got hooked on the project of making it an amazing ride. So far what I have done is an interior restoration, ad...