Get the right stance on your 05-10 Mustang V6 with a set of Eibach Pro Kit Lowering Springs for better handling & a better ride. V6 Mustangs can benefit from lowering and gain better handling with a set of Eibach springs.
Provides a 1.3" front/1.4" rear drop on coupes & a 1.3" front/1.5" drop on 2005-2010 Ford Mustang V6 convertibles.
- #1 Choice of Automotive Enthusiasts Worldwide
- High Performance Handling
- Lower Center of Gravity
- Excellent Ride Quality
- Part of the Eibach "Pro-System"
- Million Mile Warranty
- ISO 9001 and QS 9000 Quality Approved
Huge fender-well gap inherent from the factory or the popular installation of performance wheels and tires gives a vehicle a "lifted" look. The Pro-Kit is the perfect addition to any vehicle, lowering the fender gap and giving your ride a more attractive, sportier stance.
By lowering the car's center of gravity, our Pro-Kit reduces squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with Plus 1 or Plus 2 wheels and tires, the Eibach Pro-Kit is the finishing ingredient to a winning recipe for performance.
Don't forget yourPanhard Bar!
Unfortunately when lowering a 2005-14 Mustang, you will experiences a shift in the rear axle due to the 3-link suspension setup. Once the Mustang has been lowered, the geometry of the suspension pushes your Mustang's axle out to one side. Adding a Mustang Panhard Bar as a lateral suspension link between the rear axle and the Mustang chassis can correct this issue. The simple design precisely controls the side-to-side location of the axle to eliminate rear steer. The unstable and unpredictable feeling typically associated with the Mustang 3-link suspension is gone, making your car safer and easier to drive!
Eibach Summer Rebate
This rebate only applies to the following parts.
- PRO-KIT Lowering Springs
- SPORTLINE Performance Springs
- ANTI-ROLL-KIT Performance Sway Bars
Fill out the Rebate form here:
Eibach Rebate Form
Not only does my car look awesome lowered, it handles like its on rails!! The ride is a little rougher over bumps but not too bad. If I didn't live near Detroit where the roads are full of pot holes and patches, the firmer ride wouldn't bother me at all. With the springs, I also installed GT500 strut mounts, an adjustable pan hard bar and a strut tower brace. Don't forget the longer camber bolts, this makes it easier to get an accurate wheel alignment. I also installed GT take-off shocks and struts since they were so cheap.
Eibach - "The Will to Win"
Eibach makes the finest performance suspension products in the world for your Mustang or Ford Lightning. When other suspension components sag, wear out, or create sloppy handling or a bone-crushing ride, top street tuners—like top race teams, from F1 to WRC, from Le Mans to NASCAR—inevitably turn to Eibach.
Eibach integrates the exact same technology in their street springs as they do in their legendary race springs. Eibach uses the world´s finest Hi-Ten spring steel, produced to exceedingly precise tolerances. Eibach uses world-renowned German CNC coilers, as well as many unique machines engineered and built specifically by Eibach—simply state-of-the-art technology, in every step of the manufacturing process. Shop LatemodelRestoration.com for your Eibach Mustang lowering springs, suspension kits, and sway bars.
Testimonial: Coyote swap parts a step above the rest.
Late Model has made choosing the right parts for my coyote swap fox body much easier. With a dedicated section for this type of build and constantly updated with the latest parts it was a clear choice for me. They even did they're own swap with instructional videos. Thanks Late model!