Has anyone actually installed one of these in an S197? If so, where did you put it? I don't see enough space anywhere in the engine bay for something of this size! The existing cooling equipment (rad, oil cooler, steering cooler, etc) take up nearly all the available space.
Asked by Ian S. from Dulles | Comment 0 0
While I haven't personally installed one, the best place I could think of putting it is behind the front bumper in front of the A/C condenser. Removing the front bumper cover for installation would make the job much simpler, but it would not be required.
Answered by Jonathan M. from Hewitt | Comment 0 0
It has -6AN fittings and comes with hose. However the stock cooler lines for the 05-10 Mustang (not sure about other models) have much larger lines, so the fittings did not work connecting directly to the stock lines. I ended up buying a couple barb-end reducers that went from the 1/2" stock lines to the 3/8" cooler host, and connected things by splicing into the stock cooler's hose line (essentially connecting the Derale cooler in tandem with the stock cooler).
Answered by Ian S. from Dulles | 1 Comments 0 0
This version of the cooler has -6AN fittings on the cooler and comes with several fittings to connect to these, including barb-fittings if you just want to hose-clamp it (as I did).
Answered by Ian S. from Dulles | Comment 0 0