Corbeau Harness Belts are made with your comfort and safety in mind. All our Harness Belts are equipped with military grade nylon webbing and pressure reducing waist pads. Our 2-inch belts come with a simple push button release system, which makes it easy to get in and out of your harnesses.
Corbeau 2-Inch Harness Belts have the rare ability to be bolted to all your factory provided mounting points. What that means is all our hardware was manufactured to bolt right up to your factory bolt holes. In most cases no drilling or modifications are necessary, they just bolt right in.
We know how uncomfortable and annoying it can be to use traditional harness belts in your daily driver. These retractable style harnesses allow ease of movement in your vehicle and act like your stock belt. Corbeau 3-Point Retractable harness belts come in a bolt-in option only. They are made with 2 inch webbing and have a push button release system for easy disengagement. They feature an inertia reel allowing it to retract like your stock seat belts but lock under sudden movement or jolt. They also come equipped with the double release system.
- 2-Inch Military grade nylon webbing with custom "Corbeau Racing" embroidery
- Push button release buckle for easy disengagement
- Bolt-in design
- Double release buckle system
- Retractable inertia reel for OE style seat belt feel
- All 2-Inch belts are equipped with a pressure reducing waist pad to provide extra comfort and support
I bought these to go with the Corbeau racing seats I put in my 98 Cobra convertible. Since my factory belts were faded and worn, I thought these would be a perfect replacement. However, because of the location of the shoulder strap attachment point in the convertible, the belts are WAY too long to use in the factory location and there is no other place to attach them without serious modification, most likely resulting in the loss of the use of your backseat.
Conclusion: I bet these are great for coupes, but be prepared to fab a mounting point if you want to use them in a convertible.
Yes, I would recommend this item to a friend!
Was this review helpful to you?
Looks great with my CORBEAU seats
Bruce S. on
This could have been an easier install if the belt from the shoulder harness interfaced with the rear seat belt receptacle. I ended up mounting my retractor under the rear seat and now the belt comes out of the hole with the existing rear seat belt receptacle.
Corbeau - Seats for Street Race and Off Road
LatemodelRestoration.com is proud to offer Corbeau Seats for your Mustang or Lightning.
Corbeau Seats and accessories continue to be the number one choice for motorsports enthusiasts everywhere. Corbeau's unmatched experience in research and design has led to the development of the highest quality and most technologically advanced line of seats available today.
With the latest styles, the largest selection, a limited lifetime warranty, and custom direct bolt-in mounting brackets, your choice is simple. Whether it's a street, race, or off-road application, you're sure to find the perfect seat for your vehicle and your budget. Shop LatemodelRestoration.com for your Corbeau racing seats!
I just gatta say i have ordered several things from interior kit to trim pieces to transmission and diff gears and install kit they are allways on the ball and helpfull over the phone both before and after the purchases....thank you for everything!!!!
My 2011 Mustang has a V-6, but will run with the V-8's. I started out with Roush axle back exhaust, then a Airaid cold air intake, and a bigger throttle body, and recently i got the Bama tuner, I have...