Fits 87-93 Mustang V8 With Cervini's Stormin Normin Hood
Uses Factory Air Box
Fiberglass And Urethane Construction
What's in the Box
(1) Hood Plate
(1) Air Box Lid
(1) K&N Filter
(2) Foam Seals
Bolt on 25HP to your 1987-93 Ford Mustang 5.0L using a Cervini's Stormin Normin Hood with this Cervini's Ram Air Kit! This kit can increase 1/4 mile performance, .3 seconds and 3 mph. Can be used with any aftermarket mass air meter that's installed in it's stock location, such as the PRO-M 75mm bullet or the SVO 75mm. Clears all aftermarket strut tower braces. The kit has a drain system that will eliminate any water before it reaches your engine. Cervini's Ram Air Kit installs easily in approximately 1 hour. Just remove your stock air box. Attach Cervini's new outer half to your original inner half, then reinstall the whole assembly back in the original position.
NOTE: Will not work with superchargers that relocate the air box.
Cervini's - Insist on the BEST, the difference is the FIT!
Danny Cervini created Cervinis Auto Designs in 1991 with the goal to strive for perfection. As he built up the company from the ground up, he quickly became known as the industry leader for high quality, aggressively styled hoods and body components. All Cervinis products are manufactured in the USA with materials purchased in the USA.
Latemodel Restoration Supply carries a complete line of Cervini's Auto Designs hoods, spoilers, bumper covers, ram air and body kits for your Mustang or Lightning. Cervini's Auto Designs state of the art facility, combined with the latest manufacturing techniques allow them to engineer the best quality products in the industry today. Get your Cervini's Mustang and Lightning exterior styling components at LatemodelRestoration.com.
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!