This is a ram air kit for your 1993-95 Ford SVT Lightning equipped with a Cervini's Ram Air Hood #112.
The Lightning Ram Air Kit has been proven with an onboard diagnostic system to increase 1/4 mile performance, .3 seconds and 3 mph. You will experience increased throttle response, and gains in horsepower will begin at 40 mph and continue to 70 mph. Adding the Ram Air Kit is an inexpensive way to add horsepower! It's equipped with a drain system that will eliminate water before it reaches your engine. IMPORTANT: The Ram Air Kit is designed to work on Lightning models only. Installs to factory air box and duct is glued to underside of Ram Air hood Part CER-112.
* The Ram Air Kit will not work on trucks equipped with a mass air meter.
Cervini's - Insist on the BEST, the difference is the FIT!
Danny Cervini created Cervinis Auto Designs in 1991 with the goal to strive for perfection. As he built up the company from the ground up, he quickly became known as the industry leader for high quality, aggressively styled hoods and body components. All Cervinis products are manufactured in the USA with materials purchased in the USA.
Latemodel Restoration Supply carries a complete line of Cervini's Auto Designs hoods, spoilers, bumper covers, ram air and body kits for your Mustang or Lightning. Cervini's Auto Designs state of the art facility, combined with the latest manufacturing techniques allow them to engineer the best quality products in the industry today. Get your Cervini's Mustang and Lightning exterior styling components at LatemodelRestoration.com.
Products by Vehicle
Upload a Picture
Upload your own picture of the F-150 SVT Lightning Ram Air Kit for Cervini Fiberglass Ram Air Hood (93-95)
Please make sure to hold your device horzonally (like a camera) rather than vertical (like a phone).
By uploading an image, you agree to give LatemodelRestoration.com permission to use it in future advertisements and promotions.
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!