COMP-Cams Magnum hydraulic roller camshafts are designed for both the street enthusiast and the week end racer. Whether you're driving a show car with power accessories, or a High Performance car, one of these cams will fit your engine's needs.
This cam is intended for Mass Air Equipped 86-95 Mustangs with better Flowing Cylinder Heads, Intake Manifold, and Headers. Perfect for a "bolt-on" Modified Mustang. Your Mustang needs a minimum of a 3.55-3.73 rear-end. Fox Body cams not only add performance, they give your Mustang an aggressive lope exhaust tone.
I bought and installed this cam last year. Went with Twisted Wedge heads and Edelbrock intake...on a stock bottom-end 86 with flat top pistons. No PTV issues. Pulls a whopping 302 torque at 3500 rpms flat all the way to 5000 on a mail order tune, so I am very very happy with this cam.
Comp Cams - The Absolute Leader In Valve Train Performance
COMP Cams - The Absolute Leader In Valve Train Performance
COMP Cams manufactures truly superior hydraulic and solid flat tappet, hydraulic and mechanical roller, and overhead camshafts for Latemodel Mustangs and Lightnings. Comp Cams are designed and manufactured using cutting-edge technology and the finest engineering in the industry.
Whether your engine is naturally aspirated, run nitrous, a supercharger or a turbo, Comp Cams make more horsepower than any other. Looking for that ultimate hard-hitting Mustang idle? Check out the aggressive new ThumprCams.
Match Comp Cams camshafts up with their competition-grade lifters, valve springs, timing sets, and other supporting components, and you’ll experience the ultimate in race-winning reliability!
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!