Gain some much needed strength & durability from your 05-14 Mustang's rear suspension with BMR Upper Control Arm Mount. The BMR upper control arm mount for your Mustang is a direct replacement for the OE piece and requires no drilling or welding to install. This new Mustang platform only has one upper control arm and the mount is only bolted into place. Our upper mount is made from heavy duty 1/4" plate and can be either bolted or welded into place. Additionally it has dual control arm mounting points for changing instant center.
The BMR UCA mount makes installing any BMR upper control arm much easier. No need to disassemble the stock UCA assembly. The BMR mount is made from a steel much thicker than the OEM mount. The adjustable mounting holes will be great for anyone who needs them. BMR recommends the upper hole for street use.
Yes, I would recommend this item to a friend!
Was this review helpful to you?
Richard F. on
I installed this a few weeks ago with the adj UCA. I held off doing this mod because of all the stories of how hard the cabin bolt is to remove. I used a breaker bar with a 2.5 ft pipe for extra leverage. The bolt came out no problem. Wish I had done this sooner.
BMR fabrication is one of the top manufactures of Mustang suspension components that both improve performance and increase traction. With a full line of control arms, panhard bars, shock tower braces, k-members, anti-roll bar kits, and drive shaft safety loops, you can have your muscle car handling better than ever. All BMR components are engineered to fit with precision, hold up to the extreme demands of racing, and give you the edge over your competition!