Get the right stance on your 05-14 Mustang with a set of BMR Progressive Rate Lowering Springs from LatemodelRestoration.com BMR lowering springs are specifically designed to provide optimal handling without sacrificing ride quality. The front springs are progressive wound to provide variable rates. The soft portion of the progressive winding maintains near OE ride quality. When the suspension is loaded during aggressive cornering, the springs enter into the stiffer portion of the spring. We have designed additional spring rate into this portion of the spring for better control and reduced body roll. The rear springs are linear wound with the same proven spring rate as OE. Part number BMR-SP009 will lower the front 1.25" and the rear 1.5", "leveling" the car.
BMR rear springs retain the factory "hourglass" shape designed by Ford engineers. This important feature provides a "variable natural frequency" in the spring to help counteract damaging wheelhop. This is a feature of the OE springs often overlooked by other companies simply because they don't realize it's benefits in multi-purpose applications.
Don't forget yourPanhard Bar!
Unfortunately when lowering a 2005-14 Mustang, you will experiences a shift in the rear axle due to the 3-link suspension setup. Once the Mustang has been lowered, the geometry of the suspension pushes your Mustang's axle out to one side. Adding a Mustang Panhard Bar as a lateral suspension link between the rear axle and the Mustang chassis can correct this issue. The simple design precisely controls the side-to-side location of the axle to eliminate rear steer. The unstable and unpredictable feeling typically associated with the Mustang 3-link suspension is gone, making your car safer and easier to drive!
BMR fabrication is one of the top manufactures of Mustang suspension components that both improve performance and increase traction. With a full line of control arms, panhard bars, shock tower braces, k-members, anti-roll bar kits, and drive shaft safety loops, you can have your muscle car handling better than ever. All BMR components are engineered to fit with precision, hold up to the extreme demands of racing, and give you the edge over your competition!
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!