Swapping out to a smaller supercharger pulley is the easiest way to add power to your 2003-2004 Cobra short of a tune. However, the smaller you go, the less contact area the belt has on the pulley. This leads to the belt slipping.
Luckily BilletFlow devised the solution by way of this Snub Idler & Pulley Kit. If the belt is slipping, then you are not achieving full boost. This snub idler and pulley kit will not add power itself, but the elimination of belt slip allows full boost which is where the power increase comes from. It utilizes three 100mm Idler Pulleys, one 92mm pulley and is a simple bolt on installation. It is black anodized for long lasting good looks. Plus, the new billet idler pulley allow for reliable operation, unlike the stockers.
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!