Video: Mustang BBK Throttle Body Install (2011-14 5.0L 85mm & 90mm)
Published on 2014-07-24
Wanting to increase the air flow to your 2011-2014 5.0L Mustang?BBK Performance Parts makes it easy to bolt on an extra 10-15 horsepower thanks to their 85mm and 90mm Power Plus Series Throttle Bodies.These easy to install 85mm / 90mm throttle bodies are cast aluminum CNC machined, and comes in a satin finish.
Watch this video as the guys from BBK show us how easy it is to install one of these throttle bodies on your 2011-2014 Mustang. Install can be done at home with common hand tools. It is a quick way to add extra horsepower to your mustang.
Clink on the link above to see all of our products from BBK for your 5.0 S197 Mustang.
LatemodelRestortion.com 50resto SVE
2011 (11) - 2012 (12) - 2013 (13) - 2014 (14)
Now if you're looking to maximize the performance of your intake system on your 2011 to '14 Mustang GT, look no further than the BBK Power-Plus series throttle bodies. Now these throttle bodies are available on an 85mm and a 90mm version, so they'll definitely fit any kind of performance build you have planned. These throttle bodies are manufactured right here in the United States out of premium aluminum alloy, and come with all the needed installation hardware and a detailed set of instructions.
Once they're bolted on, you should pick up anywhere from 10 to 15 horsepower, maybe a little bit more depending upon other modifications you've already made. Each of these throttle bodies include all the drive by wire electronics pre-installed, and don't require any kind of custom tuning or PCM modification. So that means they're an easy bolt-on mod for your Mustang.
If you want to check out more BBK Performance parts, make sure you head on over to LatemodelRestoration.com. Check out our great prices and free shipping. If you're watching this video on YouTube, make sure you subscribe and click on the link in the video to make sure you check out more of these throttle bodies and cold air intakes for your Mustang. Let's go ahead let the guys at BBK Performance show us just how easy it is to install this throttle body.
Remove the strut tower brace if applicable. Then remove the decorative engine cover. Now, this car is already benefiting from the additional 12 horsepower and 12 foot pounds of torque delivered by our 1768 cold air induction system, so let's just unbolt that and remove the inlet tube to get access to the throttle body. Now, on both the throttle body, pull back on the red sliding locking clip and unplug the wiring harness.
Now you can simply plug in the BBK throttle body and bolt it into place using the supplied hardware. From here, reinstall the inlet tube, the decorative cover, and the strut tire brace, and you're all wrapped up. As with all BBK Power-Plus series throttle bodies, dyno testing netted consistent horsepower gains on this almost stock engine with even higher gains when used with other bolt-ons or power adders, such as performance exhaustion or super charging.