This part is 50-state legal - CARB E.O. #: D-245-14
Looking for a quick and easy way to gain an additional 10-14 hp? Look no further than this fender well cold air induction kit from BBK for your 1986-1988 Mustang 5.0L. This kit is designed to work with cars not using a mass air meter. It includes an adapter to fill the space where a mass air meter would originally be located at.
This kit features a fully hand-polished show chrome finish, a long-lasting conical air filter, and an unmatched high-flow design for superior performance and striking good looks. Don't just take our word for it, they can be found under the hoods of thousands of Mustangs from coast to coast. BBK is know for making some of the highest quality cold air kits on the market!
BBK Cold Air Induction System
- Direct-fit application with great quality and looks
- Improves air flow for better engine efficiency and gas mileage
- High flow conical element - washable and reusable cotton filter
- Includes custom molded urethane hose couplers, stainless steel hose clamps and all hardware for complete installation
- Replaces restrictive factory air box
- Direct fit
- Bolts on in minutes
Video: Mustang BBK Cold Air Intake Install - Fox Body (5.0L)
Published on 2014-06-27
BBK has made it easy for you add extra horsepower to your Fox Body Mustang thanks to their cold air intake kits. There fender well mounted intakes pull cooler air from outside the engine compartment. They are available in both Chrome and Blackout finishes.
Follow along in this video as the guys from BBK Performance show us just how easy it is to install one of these intakes on a 5.0L EFI V8 Mustang. Installation will take you roughly 30-45 mins.
Each BBK Cold Air Intake includes all the needed hardware to install the intake. It even includes detailed instruction to help make your install go smoothly. Don't forget to pick up a matching BBK throttle body and mass air meter to finish off your intake system upgrades.
LatemodelRestoration.com SVE 50Resto Ford Mustang - 1989 (89) - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93)
You can easily add an extra 10 or more horsepower to your five liter fox body Mustang by installing a cold air intake. Now the group over at BBK Performance has been designing and building cold air intakes right here in the United States since, well, since the Fox body Mustang has been sitting in the showroom floor.
Now today we are going to take a closer look at their Fenderwell mounted cold air intakes. And these are available in the classic chrome finish, and my personal favorite, the sinister looking black out addition. Now each one of these cold air intake kits include new piping, a high flow air filter, and all the hardware you need for the installation. They also include a detailed set of installation instructions to make sure that install goes by as easily as possible. Now this intake is designed to fit the '89 to '93 mass air meter five liter engines and it will fit the '86 to '88 model Mustangs with the speed density system. All you need to do is pick up one of BBK's adapter tubes. Now if you truly want to maximize the performance of your BBK cold air intake, go ahead and pick up one of their power plus series throttle bodies and one of their larger high flow mass air meters. Now to shop our complete line of BBK performance parts, click on the link in this video, or simply head on over the LatemodelRestoration.com.
After removing the entire stock air system from the vehicle, attach one of the supplied couplers to the throttle body. Then insert the high flow inlet tube with the BBK label facing the passenger side. Connect a second coupler to the mass air sensor housing, then slide it on to the other end of the air inlet tube. After attaching the remaining coupler to the air filter tube, place one end through the supplied Fenderwell bracket, and connect the other end to the mass air sensor. Then fasten the Fenderwell bracket to the vehicle with the supplied hardware. The trickiest step of this installation involves reaching the air filter through the underside of the Fenderwell and slipping it on to the end of the air filter tube. Once you've got the air filter on, go back and tighten up all the clamps, not forgetting to reconnect your mass air sensor, and you're all set.
Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
After I upgraded my 86' mustang from the stock intake to a 93' cobra intake I also swaped out the throttle body to a 65mm one from Bbk the stock air box not only looked ugly but would no longer fit the bigger throttle body. Although the shipping took a bit longer then usual, when it finally arrived I was able to install in about 30 min!! Great look and great quality and performance. I now enjoy a sweet whistling sound when I accelerate! Great product!!
Yes, I would recommend this item to a friend!
Was this review helpful to you?
Mikey D on
Bought this intake a few weeks ago for my 88 gt.. Looks great under the hood .. Nice chrome polish look and noticeable difference in power.solid bang for your buck ..
BBK - Today's Performance
Since 1988 - BBK has dedicated itself to designing and building cutting-edge high-performance parts and accessories for today's EFI-equipped Mustangs and Ford Lightnings while maintaining the OEM quality levels.
From their world-famous line of "Power-Plus-Series" performance throttle bodies to their hundreds of "CNC-Series" performance exhaust offerings - the BBK brand is known for delivering unmatched value and quality. Shop BBK for your Mustang headers, exhaust, cold air intakes, and other performance parts!
I would like to give a big thank you to Latemodel Resto Employee Tyler Rodriguez, he went above and beyond to provide outstanding Customer service, really made me a customer for life, i plan to make all my future purchases from latemodelresto when i get my hands on a 2015 Mustang. thanks again Tyler for the outstanding customer service you and latemodelresto provide.
EFI Proline 351, Dyno 530hp,600lbs tq, fun car. Basically the entire powertrain is aftermarket, from the ford racing rear end to the custom cold air intake. I've always wanted to own one since I was a...