Remove 6 lbs. from your 87-93 fox body's firewall and convert your power brakes to a manual setup with this conversion kit from ASP! This kit includes the master cylinder brake rod and adapter plate. Minor bending of the hard lines is required. Great option for drag cars! Retains use of your stock master cylinder.
I'm not sure if I did get a defective pushrod but LRS assured me that ASP only makes one length, because the push rod was about a half inch shorter than I needed. The pedal sat way lower than the clutch pedal. LRS also told me the depth of the master cylinder piston for a 90 mustang which I measured mine and that was the same depth so I was still confused. The car did have Turbocoupe rear brakes but was done before I got the car so I'm not sure if my master cylinder was different in some way. I ended up drilling and tapping the business end of the push rod and making it adjustable with the rod end coming out of the booster. Works great now and the rod is going into the master straight since ASP's rod has the offset eyelet. The car won't be on the road for a while and has 99-04 front brakes so I can't attest to the feel of the manual brakes.
ASP - Quality. Performance. Products.
ASP is one of the industry's leading producers of Mustang performance pulleys. Since 1988 ASP has been machining underdrive pulleys in house to give you the most performance for your Mustang. Each pulley goes through a CNC lathe for accurate measuring and cutting. The pulleys go through 2 cycles and a quality check to ensure each part is perfect before it leaves out of the door. Shop ASP Racing underdrive pulleys at LatemodelRestoration.com.
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!