Incorporates an Integral Stainless Steel 100 Micron Pre-Pump Filter
What's in the Box
(1) A1000Fuel Pump
(1) Billet housing Assembly
These 07-09 Shelby GT500 Stealth kits are based off our popular A1000 and Eliminator fuel pumps. Same as their external counterparts, just in a different envelope. While they are “bolt-in” replacements for the factory fuel pump, they are not designed for use with a returnless system (factory). Meaning, you MUST plumb in a return line. There are many different ways to accomplish this, whether you run a new feed and return, or reuse the original factory line as 1 of your two lines. This pump will require and external regulator, usually in the engine bay. You can however use the factory fuel rails in desired. Refer to the parts list at the bottom of this page for recommended parts. If you have questions about plumbing, please call our tech lines at (913) 647-7300 or email at email@example.com.
Why a single pump versus 2 or 3 in-tank pumps?
As the popularity of these modern muscle cars has grown, fuel systems have expanded as well. One of the most common replacement systems on the market features a double or triple fuel pump hanger. While 3 pumps will supply the necessary fuel this is still a band-aid, especially in convoluted applications like these. If one pump were to suddenly quit (which happens), the car will continue to run… until you put the engine under load or start to build boost. Suddenly you do not have enough fuel and usually will lead to a lean condition and catastrophic engine failure. With a single pump, if it were to have an issue or quit, the engine doesn’t run. No chance for a engine failure.
Due to the dielectric properties of Alcohol fuel like E85, fuel pump service life may be significantly reduced and filter
maintenance significantly increased.
Aeromotive - Serious Fuel Systems
Aeromotive is one of the industry leaders in High-Performance Fuel systems for Latemodel Mustangs and SVT Lightnings. Aeromotive is the by-product from generations of blood, sweat and tears that has shaped their knowledge and experience. Their commitment to develop the pinnacle of performance products comes from their history, real world experiences and passion.
By utilizing aerospace processes, procedures and technology, in-house engineering, true applications knowledge and 3 generations of track experience, it’s easy to see why Aeromotive has the reputation as being the “BEST”.
Aeromotive takes great pride in the fact that everything they sell, they design and make in the U.S.A. You will never see them do a “ME TOO” product. Every product they develop offers some feature or benefit left off the table by their competition. And rest assured, every product that leaves their facility has been tested to the strictest standards and guaranteed by Aeromotive for integrity and reliability.
Get your Mustang fueled up with Aeromotive's various fuel pumps, fuel rails, fuel pressure regulators, and other fuel system components.
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!