Anderson B31 Camshaft
Adding an Anderson B31 cam to your 1987-1993 Mustang is a great way to increase horsepower and torque. Performance camshafts are one of the most popular engine modifications among Mustang owners. Fox Body cams not only add performance, they give your Mustang an aggressive lope exhaust tone. This Anderson B-31 camshaft is a great addition to a forced induction Foxbody. Recommended for nitrous and supercharger applications from 8-15lbs of boost. It is the best performer for 1.6 roller rockers and stock pistons and works great with TFS or Edelbrock heads. A minimum of 30lb fuel injectors and an 80mm mass air meter are required. 3.55 or 3.73 gears are recommended when running this camshaft. It has an power band RPM range of 2400-6200. Works great with 89-95 EEC and a 2600-3000 stall would be needed. Great NA cam for 94-95 Mustang GT with great driveability.
Anderson Ford Motorsport was started in 1989 to meet the growing demand of Mustang performance parts. Since then, they have made a name for themselves in the business and have grown to be one of the largest Mustang performance centers in the Midwest. They produce and manufacture their own line of specialty parts to give your Mustang more horsepower, torque, and performance. With a wide selection of cams, camshafts, valve springs, and other valve train components, Latemodel Restoration is your #1 source for Anderson products.
Products by Vehicle
Email Me When It's Back In Stock!
Upload a Picture
Upload your own picture of the Mustang Anderson B31 Cam (87-93) 5.0
Please make sure to hold your device horzonally (like a camera) rather than vertical (like a phone).
By uploading an image, you agree to give LatemodelRestoration.com® permission to use it in future advertisements and promotions.
Had a problem with an order/quality issue. I put up a review stating so, and was contacted by Mike Linley, who was soooo nice and sooo professional, I almost felt bad about my review !! I felt the review was necessary because of bad welds/paint. Mike explained that they had a particular issue with that supplier and they had changed suppliers because of it. I must have mistakenly got an old set. (upper/lower Control arms-Foxbody). Mike asked a few questions, and was Sending me an updated replacement set while we were on the phone.!!! This is what I wish all Vendors would do; no arguments, no blame, no B.S. !! This is why LateModel stands out as an upstanding company, and backs up their products with AWESOME Customer service. Very rare in this day and age, and because of this I will be a customer for life, and will spread the good word ! Great to know some honest and Classy companies still operate in the good ol' USA. Thanks LateModel, and Thanks Mike !!! I look forward to seeing the New LCA'S and will review them too...You guys did the right thing and should and I'm overly impressed!