This Anderson Naturally Aspirated Power Pipe® is designed for Pro-M 77/80 Long Style meter on 1986-1993 Mustang 5.0L applications. Anderson Power Pies feature Mandrel bent 4" Ceramic coated (inside and out) pipe that puts the mass air and air cleaner in the inner fenderwell for a cooler intake charge for added H.P. Additional benefits of the Power Pipe is better driveability for Mustangs with bigger profile camshafts.
AFM Normally Aspirated Power Pipes were developed because of the need for higher volume, better flowing intake pipes needed with the higher RPM 4.6/5.0 and the bigger cubic inch 347/408. With the volume of air these engines need, the small factory rippled intake pipes are too restrictive and the cold air intake pipes are too small of volume. They rely on the cooler intake charge to gain H.P., which cannot be chassis Dyno tested. AFM dyno's each Power Pipe® to verify H.P. gains. The mass air is in the inner fenderwell, but we do not rely on the cooler intake to make the extra H.P. We do it in design and testing.
Comes with inlet to fit 75mm and smaller throttle bodies. Does not include Mass Air Meter or Air Cleaner. This will NOT fit a 90mm throttle body.
Testimonial: Coyote swap parts a step above the rest.
Late Model has made choosing the right parts for my coyote swap fox body much easier. With a dedicated section for this type of build and constantly updated with the latest parts it was a clear choice for me. They even did they're own swap with instructional videos. Thanks Late model!
these are mine and my Dads 2015 GT's. My Dad owns 2 other Mustangs a 1990 notch back and a 88 GT convertible. he has owned 8 Mustangs over time and over 230 cars in his lifetime. from Ford Model A's...