Check out our YouTube channel for even more tech tips, installation videos, how-tos, and more. The best place to go for anything Mustang related!
I have the cobra intake manifold and run the bbk cold air induction, do i need the egr spacer as Im pretty sure the cobra intake manifold makes it not necessary to use one, Im upgrading to a 75 mm throttle body and wondering whether to buy with or without the spacer?
Asked by Mark L. from Olympia | Comment 0 0
I would suggest buying a matching spacer as well, regardless of egr delete or not... you may want to just go with 70mm if your keeping that intake and 19# injectors...you will need the egr if your still using smog pump but if you have removed that just reset your computer and all should be fine... I deleted mine to create more room for fuel pressure regulator...if you remove ac, you should delete your iac as well for a clean look on your tb...
Answered by Elvis A. from Goldsboro | 1 Comments 0 0
Depending on what other modifications you have it could be a good choice but not the best choice. The 75mm throttle bodies are most commonly found on most heads/cam/intake cars. if you just have a typical bolt on car with stock heads and cam then a 65mm or 70mm would probably be a better fit.
Answered by Scott G. from hewitt | Comment 0 0
Ford Mustang - 1986 (86) - 1987 (87) - 1988 (88) - 1989 (89) - 1990 (90) - 1991 (91) - 1992 (92) - 1993 (93)