Accufab has developed a high flow throttle body and power inlet for the 2003-2004 Cobra. Accufab's throttle body flows 1696 cfm compared to stock 1089 cfm. Our engineers tested the stock inlet or elbow and noticed that it's design was too restrictive to accept the additional airflow our throttle body moves. Hence, we developed an aftermarket performance inlet which allows the air to flow on a straighter path directly into the intake, accounting for the major increase in performance.
Furthermore, the throttle body and power inlet combination, dyno testing has shown an increase of 10 horsepower by 2000 RPM, all the way up to 25 horsepower improvement at 6400 RPM. This is rear wheel horsepower. Torque also improved dramatically across the complete power range.
If you have a KenneBell or Whipple supercharger with a mono-blade opening, you should order the throttle body only. We do not recommend using the throttle body only with the stock inlet because of the airflow restrictions explained above. Also, the throttle body has an air passage slot machined within the wall and continuing to the backside of the part for idle air control purposes. The slot matches up exactly with the idle air control area on the power inlet when mounted together.
The throttle body is top quality billet aluminum and precision CNC machined to our engineering specifications. It is only available with a high polished finish. Accufab's power inlet is cast aluminum and CNC machined. It is available either polished, powder coated gray or a carbon fiber look.
Accufab - The Ultimate in Performance Products
When it comes to performance, Accufab is a well recognized name in the Mustang and SVT Lightning Community. Accufab parts are manufactured onsite in their high-tech CNC machine shop, giving them the ability to produce the highest quality products.
Accufab also has a full-time Research and Development department which allows them to provide a faster turn around from concept to finished product.
Shop Accufab to get performance throttle bodies, throttle body gaskets, and EGR spacers to get your Mustang or Lightning outperforming the competition.
My 2004 Mustang
It has a 3-9, V-6 motor, BBK cold air induction, prediator chip, Ford 3.73 racing Gears, Lots of chrome under the hood,Has a Calif Tonneau cover over the rear seats to give it the roa...